Как настроить синхронизацию времени

При возникновении проблем с неправильным отображением времени на интерактивных панелях следует изменить ошибочный файл конфигурации времени /etc/chrony.conf следующим образом:

# https://www.vniiftri.ru/catalog/services/sinkhronizatsiya-vremeni-cherez-ntp-servera/
server ntp1.vniiftri.ru iburst prefer
server ntp2.vniiftri.ru iburst prefer
server ntp3.vniiftri.ru iburst prefer
server ntp4.vniiftri.ru iburst prefer
server ntp1.niiftri.irkutsk.ru iburst prefer
server ntp2.niiftri.irkutsk.ru iburst prefer
server vniiftri.khv.ru iburst prefer
server vniiftri2.khv.ru iburst prefer
server ntp.sstf.nsk.ru iburst prefer

# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (https://www.pool.ntp.org/join.html).
pool pool.ntp.org iburst

# Use NTP servers from DHCP.
sourcedir /run/chrony-dhcp

# Record the rate at which the system clock gains/losses time.
driftfile /var/lib/chrony/drift

# Allow the system clock to be stepped in the first three updates
# if its offset is larger than 1 second.
makestep 1.0 3

# Enable kernel synchronization of the real-time clock (RTC).
rtcsync

# Enable hardware timestamping on all interfaces that support it.
#hwtimestamp *

# Increase the minimum number of selectable sources required to adjust
# the system clock.
#minsources 2

# Allow NTP client access from local network.
#allow 192.168.0.0/16

# Serve time even if not synchronized to a time source.
#local stratum 10

# Require authentication (nts or key option) for all NTP sources.
#authselectmode require

# Specify file containing keys for NTP authentication.
keyfile /etc/chrony.keys

# Save NTS keys and cookies.
ntsdumpdir /var/lib/chrony

# Insert/delete leap seconds by slewing instead of stepping.
#leapsecmode slew

# Get TAI-UTC offset and leap seconds from the system tz database.
leapsectz right/UTC

# Specify directory for log files.
logdir /var/log/chrony

# Select which information is logged.
#log measurements statistics tracking